vsip ? tvs array 1 05015.r10 1/08 www.protekdevices.com vsip ? series a & b applications ? rs-232 and rs-423 data lines ? telecommunications t/r protection: isdn, adsl, v.34/v.90, hdlc, t1/e1 & t3/e3 ? low & high speed data lines: ethernet &token ring ? i/o port protection iec compatibility (en61000-4) ? 61000-4-2 (esd): air - 15kv, contact - 8kv ? 61000-4-4 (eft): 40a - 5/50ns ? 61000-4-5 (surge): 24a, 8/20s - level 2(line-gnd) & level 3(line-line) features ? series a: 800 watts peak pulse power per line (tp=8/20s) ? series b: 3,400 watts peak pulse power per line (tp=8/20s) ? esd protection > 40 kilovolts ? high surge capability & low capacitance option ? protects 8 to 9 bidirectional data lines ? available in several voltages types ranging from 5v to 36v ? rohs compliant mechanical characteristics ? molded plastic vsip ? package ? available in lead-free pure-tin plating (annealed) ? solder reflow temperature: pure-tin - sn, 100: 260-270c ? consult factory for leaded device availability ? weight 1.5 grams (approximate) ? flammability rating ul 94v-0 ? marking: logo, part number, date code & pin one defined by dot on top of package 05015 pin configurations 10 pin vsip unidirectional bidirectional low capactiance isolated low capacitance
2 05015.r10 1/08 www.protekdevices.com vsip ? series a & b device characteristics series b peak pulse power (t p = 8/20s) - see figure 1 symbol v alue -55c to 150c c watts 3400 units p pp t l parameter operating temperature series a peak pulse power (t p = 8/20s) - see figure 1 p pp 800 watts maximum ratings @ 25c unless otherwise specified storage temperature t stg -55c to 150c c note 1: for voltage types not shown on the product data sheet, consult the factory. note 2: the low capacitance configuration values for each bidirectional line pair is as follows: series ?a? c = 25pf series ?b? c = 100pf note 3: forward voltage ( unidirectional configurations only ): series ?a?: v f = 1.5v @ 200ma series ?b?: v f = 1.5v 200ma st andard product ordering by p art number unidirectional - vs10pxx (a series), vsb10pxx (b series) bidirectional - vs10pxxc (a series), vsb10pxxc(b series) low capacitance - vs10pxxlc (a series), vsb10pxxlc (b series) isolated low capacitance- vs10pxxlci (a series), vsb10pxxlci (b series) xx = selected voltage electrical characteristics per line @ 25c unless otherwise specified rated stand-off voltage (see notes 1-3) v wm volts minimum breakdown voltage @ 1ma v (br) volts maximum clamping voltage (see fig. 2) @ i p = 1a v c volts maximum clamping voltage (see fig. 2) @ i p = 10a v c volts maximum leakage current @v wm i d a maximum peak pulse current (see fig. 2) i pp amps maximum clamping voltage (see fig. 2) @ i p = 1a v c volts maximum clamping voltage (see fig. 2) @ i p = 10a v c volts maximum leakage current @v wm i d a maximum peak pulse current (see fig. 2) i pp amps series a 9.8 13.4 19.5 24.4 39.1 - - - 12.5 16.6 22.7 28.5 45.6 - - - 100 10 1 1 1 - - - 45 40 34 27 22 - - - 8.6 10.9 17.0 21.4 34.2 39.8 47.0 51.2 9.1 12.0 18.8 23.6 37.8 40.0 51.9 56.6 300 200 2 2 2 2 2 2 300 258 184 147 111 93 83 68 6.0 8.5 13.3 16.7 26.7 31.1 36.7 40.0 5.0 8.0 12.0 15.0 24.0 28.0 33.0 36.0 series b
3 05015.r10 1/08 www.protekdevices.com vsip ? series a & b graphs figure 1 peak pulse power vs pulse time 100 1,000 10,000 100,000 p pp - peak pulse power - watts 0.01 1 10 100 1,000 10,000 t d - pulse duration - s 3,400w, 8/20s waveform 800w, 8/20s waveform 0 25 50 75 100 125 150 t l - lead temperature - c 20 40 60 80 100 % of rated power peak pulse power 8/20s average power figure 3 power derating curve 0 0 5 10 15 20 25 30 t - time - s 0 20 40 60 80 100 120 i pp - peak pulse current - % of i pp test waveform parameters t f = 8s t d = 20s t f peak value i pp e -t t d = t i pp /2 figure 2 pulse wave form 1000 100 10 0 1 2 3 4 5 industry standard low capacitance tvs protector low capacitance vs10pxxlc v (op) - circuit opeerating - volts c - tvs capacitance - pf figure 4 typical low capacitance curve
4 05015.r10 1/08 www.protekdevices.com vsip ? series a & b 10 pin vsip package outline & dimensions copyright ? prot ek devices 2007 specifications: protek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except jedec). design changes: protek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer?s and that in furnishing engineering and technical assistance, protek assumes no responsibility with respect to the s election or specifications of such products. protek devices 2929 south fair lane, tempe, az 85282 tel: 602-431-8101 fax: 602-431-2288 e-mail: sales@protekdevices.com web site: www.protekdevices.com outline & dimensions: rev 1 - 11/01, 06016 bulk ordering nomenclature 1. product shipped in tubes of 18 pcs per tube. 2. suffix - lf = lead-free plating, i.e., vsb10p15c-lf. package outline a b c d e f g h i j k l 26.01 6.45 6.02 0.508 1.57 2.59 1.02 3.40 7 typ 1.57 0.30 1.57 1.016 0.246 0.233 0.016 0.058 0.098 0.015 0.126 7 typ 0.058 0.008 0.058 1.024 0.254 0.237 0.020 0.062 0.102 0.040 0.134 7 typ 0.062 0.012 0.062 25.81 6.25 5.92 0.406 1.47 2.49 0.38 3.20 7 typ 1.47 0.20 1.47 dim min max min max millimeters inches vsip dimensions vsip ? package notes 1. dimensions are exclusive of mold flash and metal burrs.
|
